Accurate measuring starts with reading what a ratio actually means. Two numbers such as 2:1 are incomplete information unless the instructions also say whether they refer to weight or volume. This Resin Wale guide explains how to organise a batch and avoid the measuring shortcuts that can undermine an otherwise carefully planned project.
Read the unit before doing the maths
Use grams when the instructions specify a weight ratio and a suitable graduated measure when they specify a volume ratio. Do not assume that equal millilitres weigh the same. A conversion between methods must come from the manufacturer, not a guess based on another resin you have used.
Work through a labelled example
For a hypothetical system specifically labelled 2:1 by weight, 60 g of resin would require 30 g of hardener, producing 90 g of combined material before colour is added. This is an arithmetic example, not a mixing instruction for all products. Apply the same calculation only after confirming the ratio on your own pack.
Prepare equipment for a repeatable batch
Use a scale with capacity and resolution appropriate to your intended quantity. Tare the clean container as instructed by the scale maker and keep it on a stable surface. For volume measuring, use a suitable marked container and read the level consistently. Record actual quantities rather than relying on memory.
Keep mixing and measuring as separate checks
Correct quantities do not replace thorough mixing. Follow the resin's specified technique and time, including its guidance for the cup's sides and bottom. Avoid adding extra hardener to speed up curing. If a batch goes wrong, review ratio, units, mixing and curing conditions before repeating it with more material.
Your project checklist
- Confirm ratio, units and maximum batch size.
- Prepare cups, stirrers and a record sheet before opening bottles.
- Double-check the calculation before combining components.
- Label trial pieces with product and batch details.
Frequently asked questions
Can a measuring cup replace a digital scale?
Only when your resin instructions use volume, or provide an approved conversion.
Will extra hardener fix slow curing?
Do not change the specified ratio. Check the instructions and conditions instead.
Find your materials at Resin Wale
Explore the relevant collections below and check each product's specifications before ordering.
Need help comparing materials? Contact Resin Wale with your project size and intended use.
Continue reading
- Bubbles in Resin: A Beginner Troubleshooting Checklist
- Dried Flowers for Resin: Choosing and Arranging Inclusions
Resin Wale — Everything for Art & Crafts.